Hot-selling Ptfe Diaphragms - Virgin PTFE Molded Sheet Teflon Sheet – Lucky Star Seal Detail:
INTRODUCTION：
Skived PTFE Sheet is manufactured by technique of compacting, sintering, rotary cutting with PTFE granular resin. It has good dielectric performance and non-aging, best anti chemistry corresion ability and wide applying intension range.
The thickness is 0.5 – 8mm.
ADVANTAGE：
1. Working termp -180 – +260℃
2. Excellent non-sticky property, it is easier to remove any foreign articles
3. Low friction coefficient
4. Anti-chemical corrosion property
5. Excellent electrical insulation
APPLICATION：
1. Cable wrapping under high voltage and high temperature
2. Sealing the electronic parts
3. Reaction kettle, storage tank, valve, container, liner and gasket
4. Corrosion-resistance liner, seal, dielectric materials etc
PROPERTIES：
| PROPERTIES |
UNIT | VALUE |
| Density | g/cm³ | 2.1 – 2.3 |
| Color | White | |
| Tensile Strength (min) | MPa | 15 |
| Crack Elongation (min) | % | 150 |
| Working Temp | ℃ | -180 – +260 |
| Melting Temp | ℃ | 327 |
| Produce Max Temp | ℃ | 385 |
| Dielectric Strength(min) | Kv/mm | 10 |
SPECIFICATION：
| Thickness (mm) | Width (mm) | Length (mm) |
| 0.5 – 8 | 850, 1000, 1200, 1500, 1800, 2000 | ≥500 |
Remarks:
—Other sizes, colors can be customized.
—Length, width and thickness tolerances may vary by manufacturer
PACKAGE: Wooden Case or Pallet
DELIVERY TIME & SAMPLES：
Delivery time: As your request,usually within 1 week
Free sample is available if you need.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
PTFE Ring Gaskets – A Reliable Solution For The Engaging Industries
"Based on domestic market and expand abroad business" is our progress strategy for Hot-selling Ptfe Diaphragms - Virgin PTFE Molded Sheet Teflon Sheet – Lucky Star Seal, The product will supply to all over the world, such as: Greek , Bangladesh , Swedish , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jean
from Melbourne
- 2018.09.21 11:44
We have been looking for a professional and responsible supplier, and now we find it.
By Cherry
from Namibia
- 2017.12.31 14:53
